Hot Sale Milled HSS Taper Shank Twist Drill Bit For Concrete

Hot Sale Milled HSS Taper Shank Twist Drill Bit For Concrete

135-degree, notch-point angle is self-centering, reduces walking, good for hard material and reduces pressure on cutting edges
Surface treatment retain cutting fluid and prevent chip to tool welding
Send Inquiry
Product Introduction

Morse taper shank, for a secure and accurate tool-holding system

  • Morse taper shank, for a secure and accurate tool-holding system
  • Long length drill bits (also called taper length) have longer flutes and overall lengths than Jobber drill bits
  • High-speed steel (HSS) containing cobalt is a good combination of toughness and hardness, for use on drilling through hard substances
  • 135-degree, notch-point angle is self-centering, reduces walking, good for hard material and reduces pressure on cutting edges
  • Surface treatment retain cutting fluid and prevent chip to tool welding

 

Product Parameter (Specification)

 

 

Specification

Specification

6-11.9

32.6-33

76

12-12.9

33.1-34

77

13-13.9

34.1-34.9

78

14-14.9

35

79

15-15.5

35.1-35.5

80

15.6-16

35.6-36

81

16.1-16.9

36.1-36.5

82

17-17.9

36.6-36.9

83

18-18.9

37-38.9

84

19-19.9

39-41.9

85

20-20.9

42-43.5

86

21-21.9

43.6-44.9

87

22-22.9

45-46.5

88

23

46.6-49.5

89

23.1-24.9

49.6-50.5

90

25-25.9

51-53

91

26-26.9

54-55

92

27-27.9

56-57

93

28-28.9

58-60

94

29-29.9

61-63

95

30-30.9

64-65

96

31-31.5

66-67

97

31.6-32

68-70

98

32.1-32.5

71-75

99

   

100

 

Product Feature And Application

 

  • Morse taper shank, for a secure and accurate tool-holding system
  • Long length drill bits (also called taper length) have longer flutes and overall lengths than Jobber drill bits
  • High-speed steel (HSS) containing cobalt is a good combination of toughness and hardness, for use on drilling through hard substances
  • 135-degree, notch-point angle is self-centering, reduces walking, good for hard material and reduces pressure on cutting edges
  • Surface treatment retain cutting fluid and prevent chip to tool welding

 

Product Qualification

 

The cutting part of high-speed steel taper shank twist drill is formed in one body. The edge belt adopts the grinding technology, which has good surface finish and stable size, effectively reducing the friction coefficient during drilling and improving the processing efficiency.

 

High speed steel is a kind of tool steel with high hardness, high wear resistance and high heat resistance. It is the F.W. Taylor and M. White created it in 1898. High speed steel has good process performance, good strength and toughness, so it is mainly used to manufacture complex thin blade and impact resistant metal cutting tools, but also can manufacture high temperature bearings and cold extrusion die. In addition to the high speed steel produced by melting, powder metallurgy high speed steel has appeared since the 1960s, which has the advantage of avoiding the degradation of mechanical properties and heat treatment deformation caused by carbide segregation caused by melting.

 

High speed steel, also known as wind steel or front steel, means that when quenched, it hardens and is sharp even when cooled in air. It is a complex alloy steel containing carbide forming elements such as tungsten, molybdenum, chromium, vanadium and cobalt. The total amount of alloying elements is about 10 ~ 25%. It can maintain high hardness and HRC above 60 under the condition of high heat generated by high-speed cutting (about 500℃). This is the most important characteristic of high speed steel - red hardness. The carbon tool steel after quenching and low temperature tempering, although there is a high hardness at room temperature, but when the temperature is higher than 200℃, the hardness will drop sharply, at 500℃ hardness has been reduced to a similar degree with the annealing state, * lost the ability to cut metal, which limits the carbon tool steel making cutting tools. High speed steel can be used to manufacture cutting tools because of its good red rigidity, which makes up for the fatal shortcoming of carbon tool steel.

 

Delivery, Shipping And Serving

 

product-832-696

 

FAQ

 

1. Who are we?
We are based in Jiangsu, China, start from 2013, sell to Eastern Europe(30.00%), Southern Europe(20.00%), South America(15.00%), Northern Europe(13.00%), North America(10.00%), South Asia(7.00%), Central America(5.00%). There are total about 51-100 people in our office.


2. How can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;


3. Is there cheap shipping cost to import to our country?
For small order, Express will be the best, And for bulk order, sea ship way is best but take longer time. For urgent orders, we suggest via air to airport or by Express send to your door.


4. Why should you buy from us not from other suppliers?
Relible quality and competitive price.


5. What services can we provide?
Accepted Delivery Terms: FOB, CIF, EXW;
Accepted Payment Type: T/T, L/C, PayPal, WesternUnion, Cash;
Language Spoken:English, Chinese
 

Hot Tags: hot sale milled hss taper shank twist drill bit for concrete, China hot sale milled hss taper shank twist drill bit for concrete manufacturers, suppliers, factory, drill bit for circular economy, drill bit for maintenance, drill bit for surface treatment, drill bit for grinding, drill bits for sale, drill bit for remanufacturing

Send Inquiry

whatsapp

Phone

E-mail

Inquiry