Before use, check whether the left and right automatic control levers of the machine are in place, and whether there are people on the left and right when starting; Whether the grinding wheel is firm; Use the special dresser of the surface grinder to repair the grinding wheel;
Before processing the workpiece, the rough edges on the work shall be removed first, and the workpiece and working platform must be wiped clean;
When the grinding wheel does not stop rotating, it is forbidden to wipe the working platform under the grinding wheel and hold the workpiece; Before processing, check whether the disk is flat;
After the workpiece is placed, pay attention to whether it has been magnetically fixed; The magnetic absorbing movable workpiece shall be fixed with a stopper;
When the grinding wheel is working, irrelevant workpieces or articles shall not be placed on the working platform;
When the machine is automatically fed, the operator shall not leave the work position or do irrelevant things without authorization; Do not knock the platform with articles; The workpiece should be handled with care; When cleaning the machine, do not use the air gun to blow and wipe; After the machine works for 1 hour, it is necessary to add oil to the guide rail by manually pulling the oil pump.




