1. Mechanical wear This wear refers to the wear of the workpiece or cutting edge belt, which indicates that the tool surface has different depths and grooves. The workpiece or cutting edge has a higher hardness ratio of the tool to the workpiece, so the tool is easier to wear, so the higher the hardness of the tool is, the better its wear resistance is.
2. Bonding wear When cutting plastic materials, cutting and back cutting surfaces and back cutting viscosity, the local strength of the tool surface or particles is cut or the workpiece bonding belt is brushed to make the tool wear.
3. Diffusion wear Diffusion wear refers to the mutual diffusion of alloy elements between the tool and the workpiece during high temperature cutting, which reduces the physical and mechanical properties of the tool material and leads to increased tool wear. Diffusion is a chemical wear.
4. The phase change wear diamond saw blade uses different materials, and the heat treatment process is poor or the substrate is too thin. In some cutting friction processes, when the temperature of the substrate or material exceeds the phase change temperature, the edge band of the alloy saw blade will accelerate wear, thus losing the cutting ability.
5. Oxidative wear Oxidative wear is a kind of chemical wear. When it is at a friction temperature of 800 degrees or higher, the oxygen in the air and cobalt, tungsten carbide, titanium carbide, etc. in the alloy are oxidized and cause tool wear.
6. The accumulation of worn tools is caused by factors such as low precision or too fast feed speed, selection of grinding wheel, or impact load or material toughness during the cutting process when the tool is not grinded by the blade, and the angle of the tool face will be formed from the edge drop factor.
7. The metallographic structure of the alloy is damaged by high temperature or other factors during welding. Quenching and quenching of high density and fine alloy in the welding process, or too high temperature, will lead to alloy cracking, alloy crystal coarsening, matrix deformation, and reduce the strength and durability of the alloy.
8. The angle design is inconsistent with the cutting object, resulting in tool wear. Different hardness and various plastic materials are not suitable for selecting appropriate alloy, and the hardness of the cutting object is not affected by the angle of each surface in the dry cutting process.
9. Grinding accuracy and process affect wear. Diamond saw blade is a cutting tool, with main edge band and auxiliary edge band. The end face is cut straight, or radial cutting replaces a cutting line, forming the effect that each alloy reduces its use at many points such as cutting point or depth.
10. Due to the wear caused by improper operation or maintenance, the cutting feed speed of each cutting equipment is different, and the diamond saw blade is also designed according to different cutting objects at different angles, which is not suitable for reducing the effect.




