Feb 27, 2023 Leave a message

Precautions For Maintenance Of Diamond Saw Blade

1. After the customer purchases the diamond saw blade, if it is not used immediately, it is not allowed to touch the blade head on the diamond saw blade by hand, because the manufacturer usually sprays a layer of anti-rust paint on the blade head. If it is touched by hand, the anti-rust paint will easily peel off, which will expose the blade head of the diamond saw blade to the air and cause oxidation, which will lead to rust and affect the appearance of the diamond saw blade.
2. When buying a diamond saw blade, be sure to handle it gently. Heavy falling will inevitably lead to the deformation of the saw blade, so that the blade head of the diamond saw blade is not on the same level. Otherwise, when cutting stone, the diamond saw blade is bent, which not only affects the quality of the saw blade, but also cannot cut the stone well.
3. When the diamond saw blade is used up, the substrate should be protected, handled with care, and should not be dropped. The matrix of diamond saw blade can be reused. If the matrix is deformed, the cutter head cannot be welded. Therefore, maintaining the matrix is equivalent to buying a new saw blade cheaply.

 

Send Inquiry

whatsapp

Phone

E-mail

Inquiry